They dissolve when the block is hot tanked. It is a common item; I am surprised
the machine shop does not have them and did not reinstall them after cleaning
the block.
They are core plugs, items 2 and 3 on the Moss website.
https://mossmotors.com/ahy-006-external-engine-100-6-3000
John
-----Original Message-----
From: Healeys <healeys-bounces@autox.team.net> On Behalf Of Perry Small via
Healeys
Sent: Friday, September 5, 2025 5:00 AM
To: Healeys <healeys@autox.team.net>
Subject: [Healeys] Engine block plugs
Listers. Any advice on this info requestâ?¦ Recently had a BJ8 engine block hot
tanked and cleaned. Unfortunately, Machine shop drilled out all the small
brass oil and water gallery plugs. Do you know of a source for those or info
on the dimensions to fabricate them?
End copy
Perry
Sent from my iPhone
_______________________________________________
Support Team.Net http://www.team.net/donate.html Suggested annual donation
$12.75
Archive: http://www.team.net/pipermail/healeys
http://autox.team.net/archive/healeys
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/jmsdarch@sbcglobal.net
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/pipermail/healeys
http://autox.team.net/archive/healeys
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/mharc@autox.team.net
|