Perry, when we did my BT7 motor I seem to recall initially having trouble
sourcing the correct size plugs. Then I found this company - Core Plugs
International - the name says is all. All they do are plugs and they were
great to deal with.
https://coreplugs.co.uk
Cheers, Mirek
-----Original Message-----
From: Healeys <healeys-bounces@autox.team.net> On Behalf Of Perry Small via
Healeys
Sent: September 5, 2025 8:00 AM
To: Healeys <healeys@autox.team.net>
Subject: [Healeys] Engine block plugs
Listers. Any advice on this info requestâ?¦ Recently had a BJ8 engine block hot
tanked and cleaned. Unfortunately, Machine shop drilled out all the small
brass oil and water gallery plugs. Do you know of a source for those or info
on the dimensions to fabricate them?
End copy
Perry
Sent from my iPhone
_______________________________________________
Support Team.Net http://www.team.net/donate.html Suggested annual donation
$12.75
Archive: http://www.team.net/pipermail/healeys
http://autox.team.net/archive/healeys
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/m.g.sharp@sympatico.ca
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/pipermail/healeys
http://autox.team.net/archive/healeys
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/mharc@autox.team.net
|